EasyManua.ls Logo

Siemens TE 803 series - Page 25

Siemens TE 803 series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
en
ServiceProgrammes
Empty drip tray
Replace drip tray
Emptythedriptray23 andreinsertit.
Theapplianceisreadyforuseagain.
calc‘nClean
Duration:approx.36minutes.
calc‘nCleancombinestheseparate
functionsofdescalingandcleaning.
Ifbothprogrammesareduetoberun
soon,theespressomachineautomatically
suggeststhisserviceprogramme.
Cleaning and service
Short rinse
milk system
calcnClean
start
The startbutton8flasheswhilethe
differentcalc‘nCleanprocessesarerunning.
Thefiguresonthetoprightindicatethe
progressoftheprogramme.
Important:Ifthereisawaterfilterinthe
watertank11,itneedstoberemoved
beforetheserviceprogrammeisrun.
Presstheàbutton3.
calcnClean
start
Pressthestartbutton8;thedisplay5 will
guideyouthroughtheprogramme.
Empty drip tray
Replace drip tray
Emptythedriptray23 andreinsertit.
Swivelthecoffeeoutlet9totherightuntil
itclicksintoplace.
Place 1 l container
Place suction pipe in container
start
Placeacontainerwithacapacityofat
least1lunderthemilkfrother10.
Placetheendofthesuctionpipe10d in
thecontainer.
Pressthestartbutton8.
Cleaning
Open powder compartment
Openthepowdercompartment18.
Insert Siemens cleaning tablet
and close drawer
DropaSiemenscleaningtabletinthe
drawer 18andclose.
Remove filter
start
Info: Ifthewaterfilterisactivated,the
displaywillpromptyoutoremovethefilter,
thenpressthestartbutton8again.
Add 0.5 l water and descaler
start
Pourlukewarmwaterintotheempty
watertank11uptothe“0.5 l”markand
thendissolve1Siemensdescalingtablet
TZ80002init.
Pressthestartbutton8.Thedescaling
programmenowrunsforabout
20minutes.
Descaling
Not enough descaling fluid.
Refill fluid
start
Info: Ifthereisnotenoughdescalingsolu-
tioninthewatertank11,thecorresponding
promptisdisplayed.Pourindescalingsolu-
tionandpressthestartbutton8again.

Table of Contents

Other manuals for Siemens TE 803 series

Related product manuals