Adjusting the grind settings
The selector (3) for grind setting adjusts the
grind settings from coarse to ne.
A
Warning!
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged� Do not reach into the grinding
unit�
● With the grinding unit running, adjust the
selector (3) from ne (a: turn anticlock-
wise) to coarse (b: turn clockwise)�
a b
Information: The effects of the new grind
setting will not become apparent until after
the second cup of coffee�
Tip: Choose a ner grind for dark roasted
beans and a coarser grind for lighter beans�
Preparation using
coffee beans
This fully automatic espresso machine
grinds beans freshly for each brew�
Tip: If possible, use only beans for fully
automatic coffee and espresso machines�
For optimal quality, deep-freeze the beans
or store in a cool place in sealed containers�
Coffee beans can be ground while frozen�
Important: Fill the water tank (16) with
fresh water every day� The water tank (16)
should always contain sufcient water for
operating the appliance�
Different coffee drinks can be prepared
quite simply at the press of a button�
Preparation
The appliance must be ready for use�
1� Place the pre-warmed cup(s) under the
coffee outlet (7)�
Tip: For a small espresso, always
preheat the cup, e�g� using hot water�
2� Select the required coffee and the
required quantity by turning the upper
rotary knob (14)�
3� Select the required coffee strength by
turning the lower rotary knob (13)�
4� Press the start button (10)�
Coffee is brewed and then poured into the
cup(s)�
Press the start button (10) again to stop the
brewing process early�
To Next Page
Loading...
Need help?
General
