Need help?Do you have a question about the Siemens TPS3 11 and is the answer not in the manual?
General| Nominal Voltage | 230 V AC |
|---|---|
| Maximum Continuous Operating Voltage (Uc) | 275 V AC |
| Response Time | < 25 ns |
| Operating Temperature Range | -40°C to +80°C |
| Connection Type | Screw terminals |
| Housing Material | Thermoplastic |
| Standards | IEC 61643-11, EN 61643-11 |
| Protection class IP | IP20 |
| Voltage Protection Level (Up) | 1.5kV |
| Product function | Surge protection |
| Number of poles | 1 |
Warns of lethal voltage and shock risks during installation/service.
Highlights risks associated with improper grounding and bonding.
Instructs against performing Hi-Pot tests to prevent SPD damage.
Provides overall safety guidance and defines hazard levels (Danger, Warning, Caution).
Defines installer qualifications and system readiness for installation.
Explains different SPD types and compliance with industry standards.
Guides on checking package contents, inspecting for damage, and verifying voltage.
Covers flush mounting options and general wiring advice for installation.
Provides detailed installation steps and common problems to avoid.
Explains LED indicators for phase status and service alerts.
Describes the functionality of dry contacts and audible alarms.
Details the optional remote monitoring accessory for status annunciation.
Covers minimal maintenance and troubleshooting guidance for SPD issues.
Outlines the product warranty and provides contact for technical support.
To Next Page
