Need help?Do you have a question about the Siemens TPS4-01 and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | TPS4-01 |
| Category | Surge Protector |
| Language | English |
General safety warnings and hazardous voltage information.
Defines the qualifications required for personnel installing the SPD.
Advises against Hi-Pot testing to prevent damage and voiding warranty.
Details Siemens' warranty terms for TPS4 SPDs.
Instructions for inspecting the unit upon receipt for damage.
Guidelines for storing the SPD unit to maintain its condition.
Warns about ungrounded systems and potential high voltages.
Explains the internal overcurrent and thermal protection of the SPD.
Details requirements for proper system grounding of the SPD.
Specifies the operating temperature and humidity range for the TPS4.
Describes the status LEDs, alarm, and touchpad controls on the display panel.
Explains the function of the surge counter and reset touchpad.
Details the dry contact output for remote indication of SPD status.
Explains the function and states of the phase and alarm LEDs.
Describes the audible alarm and its silencing feature.
Details the operation of the LCD display, including screen saver and menus.
Guides on setting the SPD's internal date and time.
Explains accessing statistics, history, and clearing logs.
Details the display of event count and last recorded event.
Describes how to review logged events and their details.
Instructions for clearing the SPD's event log.
Displays manufacturer, model, and serial number.
Shows nominal voltage, system config, and firmware details.
Displays electronic memory capacity and usage status.
Details the animation and alarm for surge events.
Describes the animation and alarm for Temporary Over Voltage events.
Explains the animation and alarm for loss of protection.
Details the animation and alarm for Neutral to Ground Faults.
Describes the animation and alarm shown after power restoration.
Directs users to contact Siemens Technical Support for issues.
Instructions for replacing the SPD's display unit.
Recommends periodic inspection and testing of the SPD.
Advises against self-repair and recommends replacement for faulty units.
Provides contact information for technical support.
To Next Page
