EasyManua.ls Logo

Siemens ultraSense plus WFXD8400UC - Canceling the Active Program; After Washing

Siemens ultraSense plus WFXD8400UC
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 Open the door.
13 Add/remove the laundry.
13 Close the door.
13 Press the start/pause button.
Program continues.
Child lock is reactivated.
The indicator light is lit (red).
Canceling the active
program
If you would like to terminate a
program and remove the laundry:
13 Press the start/pause button
and hold down (5 seconds)if
child lock is active.
13 Turn the program selector to
drain or spin.
D If a program is interrupted at a
high temperature, allow the
laundry to cool down until
doorglass is not too hot to
touch.
13 Press the start/pause button.
13 Wait until the program ends.
13 Press the start/pause button
and hold down (5 seconds)if
child lock is active.
13 Open the door.
13 Unload the laundry.
D If a program is interrupted at a
high temperature, the door may
remain locked until the
appliance has cooled down.
D If the program is terminated by
switching off the appliance, the
door may remain locked.
After Washing
The start/pause indicator light
goes out.
Display field: "Remove laundry".
13 Open the door.
13 Turn the program selector to
off.
or
"No final spin" preselected
The start/pause indicator light
flashes. Display fietd:"start or drain"
13
13
or
13
13
13
13
If required, change the spin
speed; see from Page 26.
Press the start/pause button.
The program starts. The
program progress is indicated
in the display field.
The indicator light is lit.
Turn the program selector to
drain. The start/pause
indicator light flashes.
Press the start/pause button.
The indicator light is lit.
Display field: "Draining water".
When the additional program
has ended, open the door.
Turn the program selector to
off.
"Child lock: on" preselected
The start/pause indicator light is lit
(red).
Display field: "Remove laundry".
13 Press and hold down the
start/pause button (5 seconds
until "Pause" is displayed. The
start/pause indicator light
flashes (red).
13 Open the door.
13 Turn the program selector to
off.
13 Close the taps.
13 Remove the laundry.
D The child lock is reactivated as
soon as the appliance is
switched on again.
Occasionally check for any
foreign objects (e.g. coins,
paper clips) between the drum
and rubber seal-To avoid
risk of rust!
13 Leave the loading door ajar to
allow the inside of the washing
machine to dry.
29

Table of Contents

Related product manuals