Fault
Control lights do not light
up.
Programdoes not start.
start/pause indicator
lightflashes.
Programdoes not start.
"Check Door !" indicated
in the displayfield.
"Press start" is indicated
in the displayfield.
Programdoes not start.
"RealTime delay" is
indicated in the display
field.
Clockcannot be set.
"Set clock:" text remains
in the displayfield even
thoughthe menu button
has been pressed.
Notime displayed.
Endtime cannot be
selected.
Spin speed cannot be
selected.
Child lock cannot be
selected.
Detergentresidue in the
detergent dispenser.
Water does not enter the
machine or detergent is
not washed away.
"Water tap closed?"
indicated in the display
field.
Water cannot be seen in
drum.
Washingsolution has not
drained completely.
"Suds or blocked pump?"
indicated in the display
field.
Possible cause
A fuse has blown.
Powerfailure.
Appliance is in energy-saving mode.
This is not a fault.
start/pausebutton not pressed.
Doornot closed properly.
Endtime selected but still not activated by pressing
the start/pause" button.
Endtime selected and activated.
Programhas alreadystarted; when a program has
started, the clock cannot be set.
The setting hasswitched from hours to minutes; both
selectionpoints have the same text.
Time not set.
Time not set.
Programhas alreadystarted; when a program has
started, the end time can no longerbe selected.
Spinningis alreadyin progress; during spin cyclethe
speedcannot be changed.
Programselector is set to drain; spin cycle is not
possiblewith this program.
The program hasalready started.
Detergentwas damp or lumpy.
Watertap not turned on.
Action
Replacethe fuse of the individual circuit.
CallCustomerService if this fault recurs.
An interruptedprogram will be resumed when power
is restored. Ifthe laundry is to be removed duringa
powerfailure, call Customer Service
(referto Page 36).
Pressthe select button;energy-saving modeis
terminated.
Pressthe start/pause button.
Checkwhether laundry is trapped in door.
Closethe door (a click should be heard).
Programcontinues.
Pressthe start/pause button.
None.Appliance starts automatically.
Wait until program ends.
None.
Settime; see Page16.
Settime; see Page16.
Beforestarting the program, select and start the
desired endtime; see Page26.
Select speed beforespinning.
If required, select another program.
Child lock can be selectedin pausemode.
Supplyhose kinked or pinched.
Strainers in supply hose clogged.
Water pressuretoo low.
This is not a fault.
The water level is belowthe visiblepart of the drum.
Sudsor pumpis blocked.
Cleanand dry the detergentdispenser; see Page31.
Usethe cap of the detergent bottleto measure liquid
detergents.
Turnon water tap.
Programcontinues.
Eliminatethe cause.
Cleanthe water inlet strainers; see Page31.
Eliminatethe cause.
Use less detergentfor future wash loads. Detergents
specificallydesignedfor your High Efficientcywasher
producefewer suds and will include the letters "HE"
on the packaging. Cleanthe water drainage pipe
and/or drain hose.
33
To Next Page
Loading...
