Siemens WM12N269ES User Manual

en Buttons
22
Buttons
7 Buttons
Buttons
The selection of programme settings depends on the programme that is set.
You can see the selection options for each programme in the overview for
→"Programmes", Page23.
Button Selection Description
inicio / pausa +
carga (Start/ Re-
load / Pause)
¡ Start
¡ Cancel
¡ Pause
Start, cancel or pause the pro-
gramme.
vario Speed ¡ Activate
¡ Deactivate
Activate or deactivate a short washing
programme.
Note:Energy consumption increases.
The washing result is not affected by
this.
termin. (Ready
in)
1–24 hours Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
°C – 90 °C Adjust the temperature in °C.
––– - 1200 Adjust the spin speed or activate –––
(Rinse Hold).
If ––– is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the water
used for rinsing.
3 s. (3 sec.) ¡ Activate
¡ Deactivate
Activate or deactivate the childproof
lock.
Disable the control panel to prevent
unwanted or accidental operation.
If the childproof lock is activated and
the appliance has been switched off,
the childproof lock remains activated.
→"Childproof lock", Page38
prelav. (Pre-
wash)
¡ Activate
¡ Deactivate
Activate or deactivate prewash, e.g.
for washing heavily soiled laundry.
extra ¡ Activate
¡ Deactivate
Wash with more water.
Recommended for particularly sensit-
ive skin and for treating laundry more
gently.

Siemens WM12N269ES Specifications

General

Brand	Siemens
Model	WM12N269ES
Category	Washer
Language	English