Siemens WM14N277NL - Page 22

NLdisplay
indication Designation
Start / Pause
More information
Start, cancel or pause
¡lights up: the program is running and can
are aborted or paused. ¡flashing: the
program can be run
started or resumed.
Pause
Program end
Child lock
Program status
Program statusEnd
¡lights up: the childproof lock is activated. ¡
flashes: the childproof lock is activated
and the device was operated.
→ "Deactivate childproof lock", page 32
Prewash The prewash is activated.
→ "Buttons", page 24
Extra water and
extra rinse
Washing with more water and a rinse
cycle is activated.
→ "Buttons", page 24
variospeed Wash in shorter time is activated.
→ "Buttons", page 24
Reminder drum
milk cleaning
flashes: drum dirty. Run the Clean Drum
program to clean and maintain the drum
and the lye container.
→ "Clean the drum", page 34
Voltage control
learning system
Flashing: The automatic voltage monitoring
system detects impermissible undershoots
of the voltage. The program pauses.
Remark:The program will continue when
voltage is allowed again.
Voltage control
learning system
Flashing: The program has been paused
due to impermissible voltage undershoots.
The voltage is allowed again and the
program continues.
Remark:The program duration is
extended.
1Example
22