Set up and connectNL
4.Remove the 4 sleeves.
4.5 Connecting the device
Connect water supply hose
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶ Do not immerse the electric
Aquastop valve in water.
1.Connect the water inlet hose to the
tap (26.4 mm = 3/4").
5.Install the 4 covers.
6.Slide the 4 cover caps downwards.
2.Carefully open the tap and check
that the connections are tight.
Water outlet connection types
The information will help you connect this
appliance to the water outlet.
NB!
When draining, the water drain hose is
under pressure and can become detached
from the installed connection position.
▶ Secure the water drain hose against
unintentional loosening.
Remark:Prepare the transport
protection devices for transport in
the device
steps in reverse
Remark:Observe the pumping
heights.
The maximum pumping height is
100 cm.
the sequence.
15
To Next Page
Loading...
