Siemens WU14UT60HK - Page 21

Display en
21
Display Description
Spin
Programme status
–––– Rinse hold
Programme status
End Program end
Programme status
¡ Lights up: The childproof lock is activated.
¡ Flashes: The childproof lock is activated and the appli-
ance has been operated.
→"Deactivating the childproof lock", Page32
( Prewash) Prewash is activated.
→"Buttons", Page23
( Water &
Rinse Plus)
Washing with additional water and a rinse cycle is activ-
ated.
→"Buttons", Page23
Shortened programme length is activated.
→"Buttons", Page23
1
Energy consumption ecoInfo for the selected pro-
gramme.
¡ : Low energy consumption
¡ : High energy consumption
Flashes: Drum cleaning is required. Run the Drum
Clean programme for cleaning and caring for the drum
and the outer tub.
→"Cleaning the drum", Page34
⁠ Lights up: The voltage control system has paused the pro-
gram due to impermissible voltage drops. The voltage is
permissible again and the programme continues.
→" lights up.", Page40
Note:The programme duration is extended.
⁠ Flashes: The voltage control system has paused the pro-
gramme due to impermissible voltage drops.
→" flashes.", Page39
Note:The programme continues when the voltage is per-
missible again.
¡ Lights up: The door is locked and cannot be opened.
¡ Flashes: The door is not closed properly.
¡ Off: The door is unlocked and can be opened.
¡ No water pressure.
→"E:30 / -10 and/or ", Page39
¡ The water pressure from the tap is too low.
1
Example