Siemens WU14UT60HK - Buttons; Button Functions

Buttons en
23
Buttons
8 Buttons
Buttons
The selection of programme settings depends on the programme that is set.
Button Selection More information
⁠Start/Reload ¡ Start
¡ Cancel
¡ Pause
Start, cancel or pause the pro-
gramme.
⁠varioSpeed ¡ Activate
¡ Deactivate
Activate or deactivate a shorter pro-
gramme duration.
Note:Energy consumption increases.
The washing result is not affected by
this.
⁠Finish in Up to 24 hours Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
°C Temp. - 90 Adjust the temperature.
Set temperature in °C.
⁠Spin Speed –––– - 1400 Adjust the spin speed or activate ––
–– (Rinse Hold).
Set spin speed in rpm.
If –––– is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
⁠3 sec. ¡ Activate
¡ Deactivate
→"Childproof lock", Page32
⁠Prewash ¡ Activate
¡ Deactivate
Activate or deactivate prewash, e.g.
for washing heavily soiled laundry.
Note:Add the detergent for the pre-
wash in compartment I and the deter-
gent for the main wash in compart-
ment II of the detergent drawer.
→"Detergent drawer", Page17
⁠Water & Rinse
Plus
¡ Activate
¡ Deactivate
Activate or deactivate a washing pro-
gramme with more water and an addi-
tional rinse cycle.
Recommended for particularly sensit-
ive skin or in regions with very soft
water.