Siemens XCT-8 - General Guidelines; Maintenance; Unit Repair and Excluded Liability

7ML19985HX62 XCT-8 Sanitary Transducer– INSTRUCTION MANUAL Page EN-3
English
Specifications
Measurement Range
• 0.6 m (2 ft) to 8.0 m (26 ft). Dependent on application conditions.
Temperature Range
• – 40 to 125 °C (–40 to 260 °F) at 0.6 m (2 ft)
Beam Angle
•12°
Frequency
•44 kHz
Environmental
• Location: indoor / outdoor
• Ambient temperature: – 40 to 125 °C (–40 to 260 °F)
• Altitude 2000 m maximum
• Pollution degree 4
Pressure
• 200 kPa (29 psi)
Temperature Sensor
•Internal
Enclosure
• PVDF with PTFE transducer face
• PTFE flange / ferrule
Mounting
• Base: 4” sanitary fitting clamp
• Conduit: 1” NPT thread or 1” BSP
Cable
• 2-wire twisted pair / braided and foil shielded, 0.55 mm
2
(20 AWG), PVC jacket
• Maximum cable run: 365 m (1200 ft)
Approvals
•CE •CSA
US/C
•C-TICK