Sig Sauer BASEMAP KILO KILO6KHD User Manual

9
QuickBOND™ allows you to quickly bond your KILO
®
to a SIERRA™ riescope. On the SIERRA
riescope, insert the batteries and turn on to illumination setting 1. Then turn on the KILO by
pressing and releasing the RANGE button. Press and hold down both the RANGE and MODE
buttons for at least three seconds while looking through the KILO at the display. Once the
display in the rangender reads “BOND” then “GOOD” your devices have been bonded (blue
LED on the SIERRA should now be solid blue). Your calculated ballistic hold for any of the 8
ballistic groups or for a custom gun prole are now actively synced to your SIERRA riescope.

Sig Sauer BASEMAP KILO KILO6KHD Specifications

General

Brand	Sig Sauer
Model	BASEMAP KILO KILO6KHD
Category	Binoculars
Language	English