Sig Sauer BASEMAP KILO KILO6KHD User Manual

25
RANGEFINDER CONFIGURATION
PROGRAMMING SEQUENCE
Note – By using the free SIG BDX App you can easily program and congure your rangender.
1. Mode Selection (AMR, LOS, BDX-U or BDX-X)
To enter programming mode, press and release the RANGE button to wake-up the rangender.
Once the display is visible, press and hold the MODE button for 2 seconds – then release
the MODE button and the current selection will be ashing (AMR is the default setting). You
can switch between AMR, LOS, BDX-U or BDX-X by pressing and releasing the RANGE
button. Conrm your selection by pressing and releasing the MODE button which will save
your setting and index to the next setting for conguration. If you do not press and release the
MODE button the rangender will save your selection and turn o󰀨. If the user intends to use a
calculated ballistic solution, the rangender must be in BDX-U or BDX-X mode. Instructions
for downloading and conguring the BDX App on your smartphone will be detailed later in the
instructions.

Sig Sauer BASEMAP KILO KILO6KHD Specifications

General

Brand	Sig Sauer
Model	BASEMAP KILO KILO6KHD
Category	Binoculars
Language	English