Need help?Do you have a question about the SIGLENT SDS2354X Plus and is the answer not in the manual?
General| Brand | SIGLENT |
|---|---|
| Model | SDS2354X Plus |
| Category | Test Equipment |
| Language | English |
Explains safety terms and symbols used in the manual and on the instrument for safe operation.
Explains how to properly connect the power cord and safety ground for electrical shock prevention.
Describes the two methods for powering on the SDS2000X Plus oscilloscope: Power on Line and Power on by Manual.
Covers the controls for setting up and managing trigger functions, including modes and levels.
Details how to configure acquisition parameters like interpolation, acquisition mode, and memory depth.
Explains how to access and configure trigger settings, including level, mode, and source.
Details the various trigger types available, such as Edge, Slope, Pulse, and Video triggers.
Covers specific settings and procedures for triggering and decoding I2C serial communication signals.
Guides on how to select and add measurement parameters from various categories like Vertical, Horizontal, etc.
Details the FFT function for analyzing frequency spectrum, including parameters and display modes.
Details the measurement parameters for power quality analysis, including active power, voltage crest factor, etc.
Explains how to use switch loss analysis and perform deskew calibration for accurate measurements.
Explains how to perform self-tests for the screen, keyboard, and LEDs to check instrument functionality.
Provides instructions for performing self-calibration to ensure optimal working state and measurement precision.
To Next Page