Need help?Do you have a question about the SIGLENT SDS2000 Series and is the answer not in the manual?
General| Channels | 2 or 4 |
|---|---|
| Vertical Resolution | 8 bits |
| Input Coupling | DC, AC, GND |
| Operating Temperature | 0 °C to +50 °C |
| Sample Rate | 1 GSa/s |
| Memory Depth | 14 Mpts / 28 Mpts |
| Display | 7-inch TFT LCD |
| Vertical Sensitivity | 1 mV/div - 10 V/div |
| Input Impedance | 1 MΩ ± 2% |
| Trigger Modes | Edge, Pulse, Video, Slope |
| Max Input Voltage | 400 Vpk (DC + AC, 1 MΩ Input) |
| Interface | USB, LAN, HDMI |
| Math Functions | +, -, *, /, FFT |
| FFT Window Functions | Rectangular, Hamming, Hanning, Blackman-Harris |
Essential safety precautions to prevent injury and instrument damage.
Explanation of warning terms and symbols used on the product.
Steps to check the instrument and accessories after receiving the shipment.
Instructions for connecting the oscilloscope to an AC power source.
Connecting the probe and performing essential probe compensation.
Performing a function inspection using the probe and auto setup.
Solutions for common problems like no display or unstable waveforms.
To Next Page