Need help?Do you have a question about the SIGLENT SDS800X HD Series and is the answer not in the manual?
General| Channels | 2 or 4 |
|---|---|
| Vertical Sensitivity | 1 mV/div to 10 V/div |
| Vertical Resolution | 12-bit |
| Input Coupling | AC, DC, GND |
| Storage Temperature | -20 °C to +60 °C |
| Bandwidth | 100 MHz, 200 MHz |
| Input Impedance | 1 MΩ |
| Trigger Modes | Edge, Pulse, Slope, Video, Pattern, Duration, Timeout, Runt, Window |
| Math Functions | +, -, ×, ÷, FFT, Integration, Derivative |
| Automatic Measurements | Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Vrms, Freq, Period, Rise Time, Fall Time, +Width, -Width, Duty Cycle |
| Interfaces | USB, LAN, HDMI |
| Waveform Capture Rate | 500, 000 wfms/s (sequence mode) |
| Operating Temperature | 0°C to +40°C |
| Power Supply | 100 to 240 V AC, 50/60 Hz |
Explains safety symbols, terms, working environment, and product compliance standards.
Outlines electrical power, grounding, and cooling needs for safe and proper operation.
Provides instructions for cleaning and actions to take during abnormal instrument states.
Verifies received items, details warranty, and offers maintenance agreements.
Covers mechanical dimensions, power operations, system details, and options installation.
Overviews panels, connections, and probe usage for quick operation.
Introduces screen overview, menus, grid area, descriptors, and dialogs.
Illustrates touch gestures, mouse, and keyboard operations for control.
Controls for vertical scale/position, horizontal settings, and trigger.
Buttons for Run/Stop, Auto Setup, Cursors, Measure, Acquire, Save.
Methods to recall functions via menu, descriptors, shortcuts, and quick capture.
Steps to manage analog channels and configure vertical settings.
Introduces logic probe, digital channel management, and setup.
Adjusting timebase and configuring acquisition parameters.
Covers trigger basics, setup, modes, and various trigger types.
Introduces serial bus trigger/decode for I2C, SPI, UART, CAN, LIN.
Detailed guides for I2C, SPI, UART, CAN, LIN protocol analysis.
Explains cursor usage for horizontal/vertical measurements and selection.
Guides on setting parameters, measurement types, and statistics.
Introduces math functions, arithmetic, algebra, filtering, and FFT analysis.
Covers reference waveforms, event search, and data navigation.
Creating masks, setup, and defining Pass/Fail rules for testing.
Using the counter for frequency, period, and event counting.
Introduces power analysis and key quality metrics.
Covers harmonics, inrush, switching loss, slew rate, efficiency, SOA.
Generating frequency response curves and analyzing Bode plot data.
Settings for waveform display type, color, persistence, grid, and axes.
Functionality of the AWG accessory for waveform generation.
Saving/recalling data, managing files, and using instances.
Viewing system info, configuring settings, performing upgrades and self-tests.
Configuring network settings and controlling the oscilloscope via web browser.
To Next Page