Why is my Sigma BC 14.12 ALTI Bicycle Accessories showing the incorrect speed?
If your Sigma Bicycle Accessories device is showing an incorrect speed, there might be a couple of things to check. First, make sure that only one magnet is attached to the bike. Also, verify that the wheel size is correctly set in the device settings.
What to do if my Sigma BC 14.12 ALTI Bicycle Accessories shows no speed?
If your Sigma Bicycle Accessories device isn't displaying any speed, here are a few things to investigate: * Ensure the computer is correctly fastened into the bracket. * Check that the distance between the magnet and the sensor is no more than 12 mm. * Confirm the magnet is correctly positioned.
General| Backlight | Yes |
|---|---|
| Type | Wireless bicycle computer |
| Product color | White |
| Time functions | Clock, Ride time |
| Speed functions | Current speed, Average speed, Comparing speed, Maximum speed |
| Distance functions | Total, Trip (passed) |
| Temperature measurement units | F, °C |
| Additional measuring parameters | Temperature |
| Battery life | 1.5 year(s) |
Explains the function of each button: RESET, MODE 2, SET, and MODE 1.
Details which functions are accessed by pressing the MODE 1 and MODE 2 buttons.
Refers to an enclosed leaflet for detailed setup diagrams and instructions.
Explains the display layout, speed comparison, and light manager function.
Covers service interval notifications and how to check and manage battery status.
Highlights data storage and PC compatibility for logging and configuration.
Details hiding total values, special functions, and barometric altitude measurement.
Explains current altitude use, calibration, and synchronization for STS models.
Addresses 'Too Many Signals' errors and explains the device's transport mode.
Lists configurable settings such as language, unit, altitude, and wheel size.
Provides methods to accurately measure and set the wheel size for speed readings.
Refers to diagrams for instructions on how to delete functions from the bike computer.
Provides technical specifications, including battery types and replacement procedures.
Addresses issues like 'No speed' or 'Incorrect speed' with suggested solutions.
Lists the minimum, maximum, and factory default values for various parameters.
Outlines the terms and conditions for warranty claims and contact information.
Details the FCC compliance statement for the device's operation and potential interference.
States compliance with Industry Canada licence-exempt RSS standard and ICES-003.
To Next Page
