Sigma PC 22.13 - Button Functions; Activating the PC 22.13

3
US/GB
1
2
Button functions
Activating the PC 22.13
You will receive your PC 22.13 in a transport mode in
which the battery consumption is extremely low. Before
its first use, you must therefore wake up your PC 22.13.
This can be done as follows:
Press and hold the START/STOP/RESET button for five
seconds. The watch now displays the settings menu.
START/STOP/
RESET :
k Start and stop the
stopwatch
k Reset the stopwatch
(press and hold)
k Access and confirm
the settings
Press both buttons at the
same time :
k Activate the light function
k Switch from training mode to standby mode
(press and hold)
MODE/
SET :
k Switch between functions
k Access the settings menu
(press and hold)
k Change the value in the
settings menu