Sigma PC 3.11 - Page 23

23
US /GB
2.3 TRAINING TIME (START, STOP, RESET)
Start the stopwatch by pressing the top button.
Stopwatch starts running.
For the first hour of training, the stopwatch displays
the time including the tenths of seconds. If you train
for more than an hour, the training time is displayed
in the format h:mm:ss.
Press the top button to activate the PC 3.11.
Stop the stopwatch by pressing the top button.
Stopwatch stops running.
The stopwatch can be restarted by pressing the
top button again.
Reset the stopwatch to zero by keeping the top button
pressed down until “hold”, “RESET” and then 0:00:00
appears in the display.