www.sigmasport.com
16 17
1.2 Overview: Watch, symbols and display layout 1.3 Setting the time
The clock can only be set when the PC 3 is
in sleep mode. (Only time is displayed)
Note:
Do not pause too long when changing the
settings! The PC 3 automatically changes
to the next item to be set after 3-4 seconds.
Press the function button down for 4 seconds,
(You will first see the word "hold“, followed by
the flashing time format - 24 hour or 12 hour
display), then release.
Chose between 24 and 12 hour format
using the function button,
Please wait – Display will automatically change
to the next setting.
Set the current time in hours by repeatedly
pressing the function button.
Please wait – display will change to the
next setting.
Set the first digit of the minute setting by
repeatedly pressing the function button.
Please wait – display will change to the
next setting.
Set the second digit of the minute setting by
repeatedly pressing the function button.
Please wait – The time is now set.
Current heart rate
Time
Function key
Stopwatch (training time)
Symbol for heart rate
frequency received
Time
Stopwatch:
Previous training time
Symbol for running
stop watch
GB/USA
To Next Page
Loading...
