Sigma ROX 10.0 G - Stored Tracks; Start Track; Show Track

Page 28
Stored tracks
Load track
www.sigmasport.com ROX 10.0
ROX 10.0
6.3 Stored tracks
Note
Information on the memory capacity for tracks and waypoints can be found in
section ‘6.1.1 Track data memory’.
Here you can locate the tracks that you have transferred to the ROX 10.0 GPS
with the help of SIGMA Data Center.
Data Center enables you to download, modify, and store tracks from other users
or plan your own tracks on an interactive map. These tracks can be loaded onto
the ROX 10.0 GPS. Further information about Data Center can be found in the
Data Center instructions.
After selecting a track by pressing the
ENTER
button, you have four options:
− Start track
− Show track
− Show altitude profile
− Show details
6.3.1 Start track
Select “Start track” to cycle the selected track.
Once you have selected “Start track” by pressing
ENTER
, the track starts. The
display automatically switches to the training menu in “Track View” mode. Follow
the route shown on the display.
6.3.2 Show track
Select “Show track” to display the route for the selected tour.
Press
BACK
to return to the stored tracks menu.