Sigma ROX 9.0 - 3.4.1 UPPER DOT MATRIX BLOCK

49
GB/USA
ROX 9.0
3 EVERYTHING ABOUT THE SIGMA ROX 9.0
This section shows various information depending upon the menu.
3.4.1 UPPER DOT MATRIX BLOCK
3.4.1.1 FAVORITES A AND B
Up to 4 current values can be displayed here:
3The current altitude (permanent)
3The current inclination (permanent)
3Your current pulse (only i
f the chest belt has been put on)
3The current cadence (only if the cadence transmitter is fitted).
By pressing the top right button, the display ZOOMs so that only
1 of the 4 possible functions is largely displayed. Press the top
right button again to scroll to the next function.
3.4.1.2 NAVIGATION LEVEL
When enabled, the navigation level always appears by pressing
one of the two top function buttons once.
The possible button
functions are shown in the navigation level. Once you are familiar
with the computer and its functions, you have the option of
switching off the navigation level in the “Settings” menu (settings/
unit/buttons info).
3.4.1.3 INFORMATION BAR
The upper DOT matrix block, or the “information bar”, helps you to
f
ind your way around the levels. This applies to the following menu
levels: “Trip data”; “Time”; “Memory”; “Setting”. The main menu is
shown in the top part of the display, while the current submenu is
shown in the bottom part.