Sigma ROX GPS 7.0 User Manual

4 5
2

Assembly
3

Before initial use
NOTE
Fully charge the ROX GPS 7.0.
Charge the device using the micro USB cable and the USB port on your PC.
Alternatively, use the USB charger. The process takes approximately 3 hours.
To charge the device, plug the USB cable into the micro USB port on the back of
the ROX GPS 7.0 and the USB port on your PC or the USB charger (not included
in the delivery).
3.1 Initial use
1. Press and hold the START button for 5 seconds (right upper button).
2. Press START to change the language.
3. Now press the PLUS or MINUS buttons to select your desired language
and then press the START button.
4. Configure the remaining settings using the same principle.
4

Operation / Button functions /
Menu overview
4.1 Operating concept
A continually visible navigation level makes the
ROX GPS 7.0 menu navigation far easier for the
user. The possible functions of the BACK and
ENTER buttons are displayed in this level to:
− Go to the next level down (START),
− Go back to the next level up (STOP)
− To scroll within the menu level forward or
backward or to increase or reduce values
(PLUS or MINUS)
EN
CLICK!
?
or

Sigma ROX GPS 7.0 Specifications

General

Brand	Sigma
Model	ROX GPS 7.0
Category	Bicycle Accessories
Language	English