Need help?Do you have a question about the Signal 400 and is the answer not in the manual?
General| Data Rate | 10/100 Mbps |
|---|---|
| Operating Temperature | 0°C to 50°C |
| Data Transfer Rate | 10/100 Mbps |
| Fiber Connector | SC |
| Connector | RJ45 |
| Fiber Type | Multimode |
| Wavelength | 1310 nm |
| Distance | 2 km |
| Humidity | 5% to 90% non-condensing |
Overview of the SIGNAL-400 series HD encoder & modulator for various applications like home entertainment and digital signage.
Explains the signal flow from HDMI input to DVB-T RF output via encoding and modulation stages.
Details the HDMI encoding and DVB-T modulator parameters, including resolution, bit rate, and frequency.
Critical warnings and precautions for preventing fire, electrical shock, and device damage during operation and handling.
Step-by-step guide for physically connecting, mounting, and setting up the encoder modulator unit.
Explanation of the LCD display, status LEDs (Power, Alarm, Lock), and navigation buttons for device operation.
Instructions for updating the device firmware using the USB port, including required steps and file format.
To Next Page