Signal WS6980 - 3.2.6 ACTIVE ANTENNA; 3.2.7 LNB POWER; 3.2.8 LCN; 3.2.9 BEEP TONE

10
3.2.6 ACTIVE ANTENNA
Press
AB
key to switch antenna power ON/OFF.
3.2.7 LNB POWER
Press
AB
key to change the antenna power, there are 3 types including
5V/12V/24V.
3.2.8 LCN
Press
AB
key to switch LCN ON/OFF.
3.2.9 BEEP TONE
Press
AB
key to Switch beep tone ON/OFF. If we open it, the beep of lock
alarm will open when we enter into the search screen.
3.2.10 QUICK SEARCH
When parameters have been set done, press
OK into quick search. There will have some
signal information displayed on the screen.
• Scan: Press OK or red key to search current channel.
• Auto Scan: Press green key to auto search the current channel.
• S/Q: Press blue key to enlarge showing of the signal strength and quality.
3.3 DVB-C
Select DVB-C, then press OK into the Scan
Setup.
3.3.1 COUNTRY
Press
AB
key to change the default country.