Signal WS6980 - 3.3.2 CHANNEL NO.; 3.3.3 FREQUENCY; 3.3.4 STANDARD; 3.3.5 BEEP TONE

11
English
3.3.2 CHANNEL NO.
Press
AB
key to change the channel number.
3.3.3 FREQUENCY
Frequency of the current channel, input the value by using the number keys.
3.3.4 STANDARD
Press
AB
key to select J83.A/C or J83.B.
3.3.5 BEEP TONE
Press
AB
key to switch beep tone. If we open the it, the beep of lock alarm
will open when we enter into the search screen.
3.3.6 QUICK SEARCH
Please refer to 3.2.10.
3.4 SPECTRUM
• Sat-Spectrum
• Terr-Spectrum
• Cable-Spectrum
3.4.1 SAT-SPECTRUM
Press
AB
key to change Frequency;
Press red key to change bandwidth;
Press green key to change vertical or
horizontal of polarization;
Press orange key to switch 22K on or o;
Press blue key to change mode Show IF
or RF.
Press F1/F2 key to make marker backward/
forward.
Press F3 key to auto find valid TP.
Press F4 key to blind scan.