15
English
Press the green key to edit current transponder.
Press the green key to delete current transponder.
Press the blue key to scan current transponder.
3.6.5 MOTOR SETTING
There are 5 modes in motor setting:
• USALS
Controling motor according to your local position, you can modify it in Angle
Calculation.
• DiSEqC 1.2
There are 64 position you can select to move motor.
• Set East Limit
Move motor to east.
• Set West Limit
Move motor to west.
• Disable Limits
Unlimited movement.
Press the red key to save setting.
Press the green key to reset setting.
To Next Page
Loading...