- 31 -
bracket
h) you use heat-resistant and easy-to-clean finishes (such as ceramic tiles)
for the wall surfaces surrounding the hob.
When you have installed the hob, make sure that
a) the power supply cable is not accessible through cupboard doors or
drawers
b) there is adequate flow of fresh air from outside the cabinetry to the
base of the hob
c) if the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the hob
d) the isolating switch is easily accessible by the custome
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the
packaging). Do not apply force onto the controls protruding from the hob
Adjusting the bracket position
Fix the hob on the work surface by screw 2 brackets on the bottom of
hob(see picture) after installation.
Adjust the bracket position to suit for different table top thickness.
Cautions
1. The induction hotplate must be installed by qualified personnel or t
echnicians. We have professionals at your service. Please never
conduct the operation by yourself.
To Next Page
Loading...
Need help?
General
