- 35 -
If the display flashes alternately with the heat setting
a) you have not placed a pan on the correct cooking zone or,
b) the pan you’re using is not suitable for induction cooking or,
c) the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking
zone. The display will automatically turn off after 2 minutes if no suitable
pan is placed on it.
When you have finished cooking
1a. Turn the cooking zone off by scrolling down to ”0”or
touching “-” and “+” control together. Make sure the
display shows ”0
1b. Turn the whole cooktop off by touching the ON/OFF
control.
2. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving
function if you want to heat further pans, use the hotplate
that is still hot.
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the
induction hob. When an excessive temperature is monitored, the
induction hob will stop operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some
other small item (e.g. knife, fork, key) has been left on the hob, the hob
To Next Page
Loading...
Need help?
General
