TROUBLESHOOTING - INDICATOR LIGHTS
Charger is plugged in and receiving power.
Battery is receiving a Quick Charge.
Battery is too hot or cold to receive charge. Charging
starts when the battery reaches the proper temperature.
Battery cannot accept a charge. Replace battery.
LOW BATTERY CHARGE
LED flashes 1 second on, one second off, etc.
(tool will continue to operate, charged battery
will be needed soon)
DEAD BATTERY
LED flashes on for 5 seconds, 5 seconds off
etc. (tool will not operator, charged battery
required)
THERMAL OVERLOAD
LED flashes .25 second on, .25 second off etc.
(tool will not operator, ~5 minute cool off
period is needed)
21
To Next Page
Loading...
