Need help?Do you have a question about the Signode GRIPPACK and is the answer not in the manual?
Explains how to switch between Automatic and Manual modes for the tool.
Guides the user through diagnosing and resolving issues when the tool fails to operate.
General| Power Source | Pneumatic |
|---|---|
| Strap Material | Steel |
| Strap Thickness | 0.4mm to 1.2mm |
| Tensioning Force | Up to 6000N |
| Air Pressure | 6 bar |
| Weight | Approximately 9.5 lbs (4.3 kg) |
To Next Page
