Siko AV58M - Page 8

8 AV58M Datum 29.11.2011 Art.Nr. 85563 Änd. Stand 452/11





Fig. 3: Right angle mating connector
SIKO GmbH
Werk / Factory:
Weihermattenweg 2
79256 Buchenbach-Unteribental
Postanschrift / Postal address:
Postfach 1106
79195 Kirchzarten
Telefon/Phone +49 7661 394-0
Telefax/Fax +49 7661 394-388
E-Mail info@siko.de
Internet www.siko.de
Service support@siko.de
4. Thread cores through the housing and connect.
5. Screw housing on pin body.
6. Tighten pressure nut.
Changing the angle position (fig. 3):
1. Turn on female contact, slightly pull out and rotate
to desired angular position (in steps of 45°).
2. Screw on female contact.
Attention! Multiple angle adjustments to a single
direction cause shortening of the line and break.