Copyright© SILENCE Urban Ecomobility 24
c) Warning lights
OBD light. Comes on when there is an issue. If it disappears, the light should go off after you start the scooter 3 times.
Gear light. This comes on when the scooter has done all the necessary checks and is ready to drive.
Side stand (or kickstand) light. This comes on when the stand is out. The engine is also blocked automatically so the scooter won’t move with the stand
out.
Temperature light This blinks if any part is near its maximum allowable temperature. It stays on without blinking when it is over the maximum
temperature. Motor: 100°C (blinking), 110°C (steady). Controller: 70°C (blinking), 75°C (steady). BMS: 50°C (bl.), 65°C (st.) / -10°C (bl.), -15°C (st.)
Charge gauge. Steady when connected to a power source.