SILENCE S01 - Operations and Frequency; Pre-Driving Checks

Copyright© SILENCE Urban Ecomobility 56
A. OPERATIONS AND FREQUENCY
ZONE
WHAT TO DO
FREQUENCY
Painted pieces
Clean with shine restorer.
Monthly
Rubber pieces
Clean with special products to protect the rubber.
Monthly
Aluminium pieces
Clean with protective spray to prevent rusting. Remove any rust on the aluminium
carefully with steel wool and soap.
Weekly
Metal pieces
Use oil to clean and grease the metal pieces.
Monthly
Saddle
Clean with a soft sponge to remove any insects or grime.
Every day used
Instrument panel
Clean any hardened dirt with a soft sponge.
As needed
Tyres
Make sure the pressure is 1.8 bar (front) and 2.5 bar (rear).
Weekly
Lights
Clean any hardened dirt with a soft sponge.
As needed
Screen
Clean with a soft sponge to remove any insects or grime.
Every day used
B. CHECK BEFORE DRIVING
1) Charge level
Check the charge level on the LCD screen. If it is too low, recharge the battery before using your scooter:
2) Lights and indicators
Replace any parts that don’t work properly or have been damaged before driving. When the speedometer lights don’t work properly, they start blinking more
quickly to indicate that there is some sort of problem.