Copyright© SILENCE Urban Ecomobility 59
After the “D” icon lights up (scooter ready to drive), make sure the braking system is working properly: Squeeze the left and right brake levers at the same time
to make sure there is resistance to the pressure.
Once the scooter ready light is on, you can release the brake levers. The system is working and the accelerator is ready to be used:
C. SOLVING PROBLEMS
For the issues described here, we assume that only the final components are the cause of the problem.
If the problem continues after replacing the final component, take the scooter to the official point-of-sale.
All of our scooters are examined carefully before being sent to our distributor. Even though the scooters are carefully inspected, some issues may
arise. The following table offers guidelines for identifying the problem and, if possible, repairing it yourself. If you can’t resolve the problem on
your own, take your scooter to the point-of-sale for the necessary repairs.
To Next Page
Loading...
