Copyright© SILENCE Urban Ecomobility 30
INFO
This button is the same as the INFO button on the speedometer and has the same functions (see “¡Error! No se encuentra el origen de la
referencia.” section).
MODE
This button has two uses:
o Starting the scooter: after you start the vehicle with the key or the APP, press the MODE button until the green “D”
lights up on the instrument panel and you hear a chime. Plus, the front sidelights will switch on (the rear sidelights go on
automatically when you turn the key to ON).
o Mode selector: this scooter has three different driving modes, which can be chosen using the MODE button.
These are:
o CITY “C”: The scooter has been designed to drive regularly in CITY “C” mode. This gives the vehicle good performance and
balanced consumption. This is the default mode when you switch on the scooter. It includes limited use of the regenerative
brake.
o SPORT “S”: This driving mode gives you more power and speed at specific moments. Frequent use of the SPORT mode
decreases the scooter’s range (kilometres it can travel with a full charge) as it uses more power and can raise the temperature
of the engine/battery, which could have a negative effect on performance or cause the scooter to shut off. The full regenerative
brake is used.
To Next Page
Loading...
