Copyright© SILENCE Urban Ecomobility 50
4) Battery monitoring system (BMS)
This battery has a monitoring system, called the BMS (Battery Management System), that controls things like temperature and voltage. It was developed by the
SILENCE R&D team and plays a very important role in balancing the individual charge of each cell and the overall charge of each series of cells, making sure the
battery works at an optimal level.
This system also provides information on the charge level and sets protocols for charging and discharging power. Additionally, it includes an action plan for
irregular battery status, triggering preventive measures in case of power, voltage or temperature spikes, etc.
In short, the BMS is the battery’s “brain”, ensuring optimal performance and safety.
5) Connecting charging unit
You can charge your S01 battery on the scooter or on its own. In either case, both the scooter and the
battery have an IEC male contact for the power cable. The cable has an IEC socket contact and a Schuko
contact (commonly used in Spain for the domestic grid), and is normally stored in the compartment
under the seat, where the male power contact point is located. On the battery, it is on the back:
To Next Page
Loading...
