Silex technology SD-320AN - Raw TCP Connection Mode; What Is Raw TCP Connection Mode; Before You Begin

6. How to Use
89
6-3. Raw TCP Connection Mode
What is Raw TCP Connection Mode?
Raw TCP Connection Mode is a feature used to send or receive serial port data transparently
over TCP/IP.
Using this feature, you can directly communicate with a serial device using an application
program that runs on the TCP Socket API.
(Link to Serial Device Using TCP Raw Port)
Change the settings to use SD-300/SD-320AN in Raw TCP Connection Mode.
* For details on how to access the Web page, refer to Access the SD-300/SD-320AN Web Page.
Access the Web page of SD-300/SD-320AN.
Before You Begin
Note
1.
In the left pane of the Web page, click General.
2.