Silex technology SX-2000U2

To Next Page

1-1About the SX-2000U2

Users Manual

- silex technology shall not be liable for any loss or damage of data in data storage devices

resulting from the use of this product. silex technology shall not also be liable for any leak,

manipulation, loss, or corruption of data in data storage devices connected to this product as a

result of improper use.

- USB devices using isochronous transmission, such as web cameras or speaker devices, are not

supported.

- Some USB devices may not be supported depending on the USB device driver specification.

Please refer to our web site( http://www.silex.jp/ ) for the latest compatibility information.

1 About the SX-2000U2

The SX-2000U2 is a USB device server that supports 10BASE-T/100BASE-TX. This product

enables various USB devices to be shared by PCs running Windows 2000/XP.

1.1 Features

- Share various USB devices

By using this product and the bundled utility, "SX Virtual Link," it is possible to share USB devices

such as printers, scanners, storage devices among PCs running Windows 2000/XP. In addition, network

skill is not required for using this product. This product allows you to use USB devices as if they were

connected directly to your PC.

- Easy Configuration

The bundled software CD-ROM, "Device Server Setup CD" includes a wizard-style configuration utility.

It allows you to configure this product as well as install the software easily by answering questions on

the screen.

- Printer auto connection

When printing to a USB device, executing the print operation to the device will automatically prompt SX

Virtual Link to connect with the device to print, and then disconnect once the job is printed. It is not

required to manually connect to the device with SX Virtual Link for printing.

TIP

Need help?

Do you have a question about the Silex technology SX-2000U2 and is the answer not in the manual?

Silex technology SX-2000U2 Specifications

General