Need help?Do you have a question about the Silhouette 8142 and is the answer not in the manual?
General| Brand | Silhouette |
|---|---|
| Model | 8142 |
| Category | 3D Glasses |
| Language | English |
Accessing drilling coordinates and OMA shape files for rimless Rx glazing.
Information on obtaining lens patterns for rimless glazing from customer service.
Specifications for Nylor glazing, including groove width and depth for optimal lens fit.
Specifications for inline fullrim glazing, covering groove placement and dimensions.
Specific glazing details for Explorer Line models in a glass-in-glass configuration.
Recommendations for ordering lenses with 6.0 and 8.0 base curves, including materials and design.
Overview of the Silhouette P 0033 Mounting Box and its essential tools for glazing.
Details on the Silhouette P0031 Pliers Box and the specialized pliers it contains.
Step-by-step instructions for safely disassembling eyewear lenses using specialized tools.
Procedure for carefully removing residual BLS sleeve material from fixation pins without damage.
Instructions for pressing plastic sleeves onto lenses and cutting them with a BLS cutter.
Method for manually pressing frame parts into place using a demo lens for counter pressure.
Using mounting pliers to fix frame parts into BLS sleeves, including single-hole mounting techniques.
Specific glazing instructions for TMA Icon models, noting plano-only availability and lens exchange.
How to adjust the inclination of TMA Icon frames by bending the temple using pliers.
Guide to Rx glazing TMA Icon Aviator models, detailing lens groove sizes and recommended tools.
Method for adjusting the inclination of TMA Icon Aviator temples using pliers.
Instructions for Rx glazing Adventurer Aviator 8667, including tool selection for single hole mounting.
Step-by-step process for disassembling the temple on Adventurer Aviator 8667 frames.
Guide to assembling the temple on Adventurer Aviator 8667, including hinge preparation.
Procedures for adjusting inclination and temple opening on Adventurer Aviator 8667 frames.
Technical details for Nylor glazing of Adventurer 8685, focusing on groove placement and dimensions.
RX lens glazing for Adventurer 8685 Nylor, emphasizing groove sizes and polarized lens handling.
Methods for adjusting inclination and temple opening on Adventurer 8685 frames.
Detailed steps for disassembling the temple of Adventurer 8685 frames.
Steps for assembling the temple onto Adventurer 8685 frames, including hinge preparation.
Technical details for inline fullrim glazing of Titan Contour 8153, including groove placement and dimensions.
RX lens Nylor glazing for Titan Contour, covering groove sizes and polarized lens considerations.
Instructions for removing lenses from Titan Contour frames using a specialized glazing tool.
Detailed sequence for lifting the frame top and tilting the lens for removal.
Guide for inserting lenses into Titan Contour, detailing sequence and tool usage.
Final steps for lens insertion, including tool placement behind the temple and frame seating.
Procedure to adjust frame inclination on Titan Contour by holding and inclining at the hinge.
Methods to reduce or enlarge temple opening on Titan Contour frames with a padded plier.
Method for temple exchange, including hinge lubrication, without using a leverage tool.
Steps for pressing a temple into the hinge during exchange, ensuring proper support of the endpiece.
Guide on adjusting the temple shape behind the ear by straightening and bending in small increments.
Instructions for glazing Carbon T1 models with RX lens Base 8, specifying pliers and BLS types.
Steps for adjusting frame inclination using mounting pliers and a dedicated inclination tool.
Methods for reducing and enlarging temple opening on frames, using appropriate pliers and hand pressure.
Detailed instructions for disassembling temples using a red tool as a fulcrum, noting the click release.
Procedure for assembling temples, including hinge placement and pressing the SPX-temple into the frame side part.
Information on glazing adapter sleeves for Explorer Line using specific Silhouette pliers and BLS.
Recommendations for 6.0 base curve Rx lenses and polarized lens groove placement for Explorer Line.
Guidance on noting the distance between lenses (DBL) for Explorer Line models during Rx glazing.
Adjusting disc hinge inclination on Explorer Line using mounting and inclination tools for hinge integrity.
To Next Page
