Need help?Do you have a question about the Silhouette Racing Series and is the answer not in the manual?
General| Brand | Silhouette |
|---|---|
| Model | Racing Series |
| Category | 3D Glasses |
| Language | English |
Frame base curve, compatible lens types (High Index, Polycarbonate, Trivex), and required tools for glazing.
Information on obtaining OMA shape files, drill coordinates, and patterns from Silhouette.
Steps to adjust temple inclination by opening, securing lens, and adjusting at the hinge.
Instructions to open temple, secure lens, and press temple outward at hinge pivot to enlarge opening.
Instructions to open temple, secure lens, and press temple inward at hinge pivot to reduce opening.
Use large curves to adjust temple shape to fit the head.
Shape temple end to ear shape using large curves, avoiding pressure on the temple tip.
Straighten temple end and remove temple cover as the initial step for shortening the temple.
Shorten the titanium wire using diagonal cutters and file any sharp edges or burrs.
Form an indentation on the titanium wire end with round pliers and reinstall the temple cover.
Use a red multi-tool near hinge, close hinge on it, and apply pressure behind tool to detach temple.
Align temple with metal hinge element and press in with thumb until it clicks.
To Next Page
