Silk'n Infinity H3102 - Possible Side Effects; Minor Skin Discomfort; Skin Redness; Increased Skin Sensitivity

Pulsing is the best technique for treating specic spots or small areas.
U
Press the treatment surface against your skin. Work in rows (either
across or down as shown in the image). Start at one end of each row and
progress to the other end.
U
The treatment surface creates temporary pressure marks on the
treated area so you can see areas you have treated.
U
After each pulse, move the treatment surface to the next spot. Keep
doing this pulsing action for the area you are treating.
U
Avoid gaps or overlaps as you use the device.
Gliding is the best technique for treating larger parts of the body.
Press the treatment surface rmly against your skin and slowly glide
over your skin (either across or down as shown in the image). Make sure
that the treatment surface is always touching your skin.
U
At lower energy levels, the device takes only 1-1.5 seconds to recharge
between pulses. This generates a nonstop sequence of ashes.
U
Glide at a speed so that you avoid gaps or overlaps.
C
Do not treat the same area of skin more than once per hair removal
session.
C
Stop use immediately if you have any pain.
4.5 Exposure to the sun
U
Sun exposure includes constant unprotected exposure to direct
sunlight for over 15 minutes, or constant unprotected exposure to
diuse sunlight for over 1 hour.
U
Do not use on tanned skin after recent sun exposure, including tanning
machines. Using the device on skin that has been recently exposed to
sunlight can result in adverse eects such as burns, blisters, and skin color
changes (hyper- or hypo-pigmentation).
EN
16
Infinity NA 1704A inside ED278-07.indd 16 25/02/2018 08:30:06