Specs, Spot Size 2cm x 3cm [6cm
2
]
Speed 1 pulse every 3.5 second: 1.7 cm
2
/sec
Technology Home Pulsed Light™
Max Energy Level Max 5J/cm
2
Wavelength 475-1200nm
Charging Time/Power Source Continuous operation
Electrical Requirements 100-240VAC, 2A
Time Needed to Treat Lower Legs 30 minutes
Operation and Safety
Safety sensor tip enables self-trigger for maximum safety & control. Easy to
use on all body parts
Package Size Height 9 inch, Width 9 inch, Depth 5.2 inch
System Weight 4 pounds
Temperature
Operating 10 to 40°C
Storage -40 to +70°C
Relative Humidity
Operating 30 to 75%rH
Storage 10 to 90%rH
Atmospheric pressure
Operating 700 to 1060hPa
Storage 500 to 1060hPa
uncertainty about sun exposure please contact your physician or Home Skinovations customer support.
17. Should I do anything before using Silk’n™?
Before any Silk’n™ session it is important to avoid sun exposure on the treated area for at least four weeks. A
high level UV Sun Screen (SPF 50+) will help, as will clothing covering the treated area. The area to be treated
should also be cleaned with mild soap and water, and the hairs shaved down to skin level.
18. How should I care for the treatment area after using Silk’n™?
The area treated with Silk’n™ can be cleaned and maintained with standard skin care products. Special care must
be taken to avoid unprotected sun exposure. Strong sunscreens (50+ SPF) and covering clothing are suitable for
protection from the sun.
19. Should I pull the hairs out after treatment?
No, let the hairs gradually fall out on their own. This may take up to 2 weeks.
To Next Page
Loading...
