13
Attaching and removing the roller
Risk of damage to property!
Risk of damage to property!
The microsmooth rollers are made of a ex-
ible material and have surfaces for smooth-
ing or polishing. Compressing the rollers
could damage the surface material.
• Do not compress the rollers.
Risk of damage to property!
If you pull the attached roller o of the
nail polisher axle while the nail polisher is
switched on, you could damage the nail
polisher.
• Never pull the attached roller that is still ro-
tating o of the nail polisher when it is on.
• Always switch the nail polisher o before
you change a roller.
Attaching a roller
7. Attach the desired roller (
6
or
7
) to the axle
2
of the nail
polisher (see g. A and F).
8. Carefully push the roller completely onto the axle.
9. Gently shake the nail polisher to determine whether the roller is
secure.
Removing the roller
1. Carefully grasp the bottom end of the roller (
6
or
7
).
2. Pull the roller up and o of the axle
5
of the nail polisher (see
g. A and F).
To Next Page
Loading...