16
Cleaning the nail polisher
After every use, clean your nail polisher as follows:
1. Take the roller o of the nail polisher (see g. F).
2. Use a paper towel to remove dust from the nail polisher, particu-
larly from the axle
2
and the dust guard
3
(see g. A).
3. Use a paper towel to wipe the dust o of the rollers after use.
4. Store the cleaned, dry nail polisher and rollers in a cool, dry
location.
If the nail polisher is very dusty, you should also clean it as follows:
1. Remove the batteries.
2. Wipe the nail polisher o with a damp cloth or paper towel.
3. Dry the nail polisher with a dry cloth or paper towel.
4. Let the nail polisher air dry completely overnight without the
battery.
5. Store the cleaned, dry nail polisher and rollers in a cool, dry
location.
Replacing the rollers
• Replace the microsmooth rollers as described in the chapter
“Attaching and removing the roller”.
Always replace the microsmooth rollers:
• after three complete treatments of all ngernails and toe nails.
• if the rollers appear to be worn.
• if the rollers have cracks or are otherwise damaged.
For best results, we recommend always replacing both
rollers at the same time.
You can obtain original spare parts from your specialist dealer or on
our website: www.silkn.eu.
To Next Page
Loading...