Silver Eagle SE430 User Manual

SE430 1 revised 10/15/15
SPECIFICATIONS
Max. Free Speed................. 15,000 RPM
Air Inlet............................1/4" NPT
Hose Size ...........................3/8" I.D.
Air Pressure......................... 90 psig
Air Consumption.....................2.9 CFM
Length (In.)............................4-1/2"
Shipping Wt. .........................1.5 Lbs.
Paper Size .........................2" and 3"
Sound Level........................86.2 dBA
Vibration Level ....................0.9 m/sec²
Operating Instructions Warning Information Parts Breakdown
Copyright © Professional Tool Products, 2015
All rights reserved.
SE430
Mini DA Sander
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Leadfromlead-basedpaints,
• Crystallinesilicafrombricksandcementandothermasonryproducts,and
• Arsenicandchromiumfromchemically-treatedlumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
WARNING
WARNING
RATED RPM OF THE
ACCESSORY USED MUST
EXCEED THE MAXIMUM
TOOL RPM SHOWN
ALWAYS READ
INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING PROTECTION
ALWAYS WEAR
BREATHING APPARATUS
AVOID PROLONGED
EXPOSURE TO
VIBRATION
RPMRPMRPM

Silver Eagle SE430 Specifications

General

Brand	Silver Eagle
Model	SE430
Category	Sander
Language	English

Summary

Specifications

Safety Warnings

Chemical Exposure Warning

Details on hazardous chemicals in dust from sanding and construction activities, and protective measures.

Safety Information and Precautions

General Safety Instructions

Read manual, follow standards, use correct air pressure, and wear PPE for safe operation and maintenance.

Tool Operation Guidelines

Precautions for tool handling, accessory use, personal protection, and avoiding hazardous environments.

Operating Procedures

Tool Operation Steps

Instructions for mounting sandpaper, testing, sanding technique, and safe shutdown procedures.

Air Supply Requirements

Specifies recommended air pressure, air quality, hose size, and connections for optimal tool performance.

Lubrication and Maintenance

Daily lubrication with air tool oil and maintenance warnings for safe operation.

Troubleshooting Common Issues

Addresses potential causes for loss of power or erratic action and corrective measures.

Warranty Information

Parts Breakdown