Silver King SK-1-C1 - User Manual

Service
Manual
Product Identification
SK-1-C1 Cream Dispenser 45386 REV A 01/2019
Printed in USA 01/2019
Cream Dispenser
Model SK-1-C1
TABLE OF CONTENTS
Product Idencaon…………………………...……………….Page 1
Table of Contents…..……………………….…………………..…Page 1
Warranty Statement……………………….…………………..…Page 2
Electrical Specicaons.………………….…………………..…Page 3
Safety Informaon…...…………………….…………………..…Page 3
General…………………..……………………………………………..Page 3
Important……..……….……………………….…………………..…Page 3
Tools Required………...…………………….…………………..…Page 4
Operaonal Flowchart………..………….…………………..…Page 5
Manager Mode Flowchart.……………….……………………Page 6
Service Menu Flowchart………………….………….……..….Page 7
Remove/Replace Display Assembly…...……..……….. Page 8
Remove/Replace Control Board…...……..……….…..… Page 9
Remove/Replace Load Cell…...……..………..…………….Page 10,11
Remove/Replace Solenoid…...……..…………………….…Page 12
Remove/Replace Power Supply…...……..…………....…Page 13
Troubleshoong Steps…...……..…………………………..…Page 14,15
Parts List and Exploded View…...……..………..………….Page 16
Wiring Diagram…...……..……………………………………..…Page 17
Allowable Labor Limits…...……..…………………………..…Page 18
Product Valve
Control Panel
Drip Tray
Power Cord
(on back side)
Power Switch
(on back side)
Small Button
Medium Button
Large Button
Hot Drink Selection
Iced Drink Selection
Special Drink Selection
Lock Button
Indicator Panel
1600 Xenium Lane N, Plymouth , MN 55441 USA
Telephone: 763-923-2441 • Toll Free: 1-800-328-3329
Fax: 763-553-1209 • www.silverking.com

Summary

Warranty Statement

Parts Warranty

Covers defects in material and workmanship for one year from purchase or 25 months from shipment.

Compressor Warranty

Covers compressor replacement for five years due to defects, excluding delivery and installation charges.

Labor Warranty

Covers standard straight time labor charges and reasonable travel time within one year of purchase.

Safety and Electrical Information

General Safety Precautions

Safety warnings for electric shock, handling hot parts, and lifting to prevent injury.

Electrical Specifications

Details the unit's electrical requirements: 115V, 60 Hz, 1 Phase.

Important Safety Notes

Covers specification changes and California Proposition 65 warning about chemical exposure.

Tools Required for Service

Operational Flowchart

Manager Mode Operation Flowchart

Service Menu Operation Flowchart

Display Assembly Service Procedures

Remove Display Assembly

Steps to detach the display unit from the dispenser, including disconnecting cables.

Replace Display Assembly

Steps to reattach the display unit to the dispenser, ensuring cable and fascia are secure.

Control Board Service Procedures

Remove Control Board

Steps to detach the control board, including disconnecting connectors and removing nuts.

Replace Control Board

Steps to reattach the control board, reconnecting all cables and securing nuts.

Load Cell Removal Procedure

Load Cell Replacement Procedure

Solenoid Service Procedures

Remove Solenoid

Steps to detach the solenoid, including disconnecting the connector and removing screws.

Replace Solenoid

Steps to reattach the solenoid, reconnecting its connector and securing it with screws.

Power Supply Assembly Service Procedures

Remove Power Supply Assembly

Steps to detach the power supply assembly, including disconnecting cables and removing nuts.

Replace Power Supply

Steps to reattach the power supply assembly, reconnecting cables and securing nuts.

Troubleshooting Common Issues

Parts List and Exploded View

Cream Dispenser Wiring Diagram

Allowable Service Labor Times

Silver King SK-1-C1 Specifications

General

Model	SK-1-C1
Material	Stainless Steel
Number of Valves	1
Color	Silver
Type	Dispenser
Dispensing Mechanism	Pump
Mounting Type	Wall-mounted