What to do if the compressor will not run on my Silver King Dispenser?
If the compressor of your Silver King Dispenser isn't running, here's what you can check: * Ensure the power switch is in the “On” position. * Verify the service cord is properly inserted into the wall receptacle; if not, replace it. * Check the circuit breaker or fuse.
Why does the compressor run constantly on my Silver King SKMCD1P/C1?
If the compressor in your Silver King Dispenser runs constantly, try these steps: 1. Adjust the temperature control, as the temperature might be set too low. 2. Reduce the room temperature or relocate the dispenser if the room temperature is abnormally high. 3. Check if the door or lid gaskets are sealing properly. If not, adjust them.
How to fix a beverage leaking or not flowing from my Silver King Dispenser?
If your Silver King Dispenser is leaking beverage or the beverage is not flowing, it might be due to a kinked tube. To fix this, remove the valve and pull the tube straight through the valve area. Another cause might be a stuck valve. In this case, you should clean the valve and valve area.
Details the warranty coverage for parts for two years from purchase or 25 months from shipment.
Covers the compressor for five years from purchase or five years and one month from shipment.
Information on connecting the dispenser to a power source, including voltage and plug requirements.
Precautions to avoid electric shock, including unplugging the unit and proper grounding.
Warnings about potential contact with moving or hot components during servicing.
Steps for starting the cream dispenser and ensuring it reaches operating temperature.
General| Model | SKMCD1P/C1 |
|---|---|
| Type | Milk Dispenser |
| Refrigerant | R134a |
| Temperature Range | 33°F to 41°F |
| Door Type | Stainless Steel |
| Power Supply | 115V/60Hz |
| Voltage | 115V |
To Next Page
