■ 40
│
GB
│
MT
SEAD 1800 A1
Cleaning the pouring tap
To clean the tap 0 thoroughly, you can unscrew the tap lever q. The tap 0
cannot be unscrewed as this could lead to problems with the seal.
1) Screw the tap lever q anticlockwise off the tap 0.
2) Place the pouring lever q in a mild soapy solution and swirl it back and
forth.
3) Rinse it off with clear water.
4) To clean the pouring tap 0 allow a mild soapy solution to flow through it.
Should there be stubborn soiling on the inside of the pouring tap 0 use a
pipe cleaner or similar to remove it.
5) Afterwards, rinse the pouring tap 0 through with clear water.
6) Screw the tap lever q clockwise back onto the tap 0.
To Next Page
Loading...
